INTERNATIONAL Products For Sale

Thermostat (180°) fits Case-IH COTTON PICKER: 414 Case-IH COTTON PICKER: 420 Case-IH TRACTOR: 460 (Diesel) Case-IH TRACTOR: 560 (Diesel) Case-IH TRACTOR: 606 (Diesel) Case-IH TRACTOR: 656 (Diesel) Case-IH TRACTOR: 660 (Diesel) Case-IH TRACTO...

TA SHAFT OIL SLINGER, part number # 830651 , fits INTERNATIONAL International Models: 100 thru 986 706, 756, 766, 786, 806, 826, 856, 886, 966, 986 INTERNATIONAL International Models: 1026 thru 1680 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, ...

379327R91 Tie Rod End, new aftermarket Dim A (1) A - 4.060" Dim B (2) B - .812" Dim C (3) 16 UN RH Thread Fits, Front Axle/Steering Parts > Front Axle, Cast I Beam Case-IH TRACTOR: 574 Front Axle/Steering Parts > Tie Rods and Ball Joint...

70933C91 Pump, Hyd Main Hitch (12 GPM), New Aftermarket, Has a female spline in driveshaft to drive a piggyback pump. fits fits 560, 660, most 06,56,66 and some 86 tractors Case-IH TRACTOR: 660 Case-IH TRACTOR: 6788 Case-IH TRACTOR: 706 Case-IH T...

Head Gasket Set , New Aftermarkert, Fits Case-IH TRACTOR: M (SN <278049) Case-IH TRACTOR: M (SN 278050>) Case-IH TRACTOR: MV (SN <278049) Case-IH TRACTOR: MV (SN 278050>) Case-IH TRACTOR: OS6 (SN <35463) Case-IH TRACTOR: OS6 (SN 35464>) Case-...

Triple Baffle Fuel Cap, NEW AFTERMARKET, Specifications This fuel cap includes the gasket (IHS239) 2-7/8" outside diameter 2-1/2" tall 2.144" tang to tang length 0.400" tang width 1.840" inside center diameter Model Note Equipment Information ...

Screen, Fuel Filter, NEW AFTERMARKET Case-IH INDUSTRIAL/CONSTRUCTION: 2400A Case-IH INDUSTRIAL/CONSTRUCTION: 2404 Case-IH INDUSTRIAL/CONSTRUCTION: 2500A Case-IH INDUSTRIAL/CONSTRUCTION: 2504 Case-IH INDUSTRIAL/CONSTRUCTION: 2606 Case-IH INDUSTRI...

Carburetor Float, NEW AFTERMARKET ,FITS Farmall M, Super H, Super M, 300, 350, 400, 450 AND OTHERS FITS CARB NUMBERS 352063R91 352063R92 352063R93 352063R94 356096R91 356096R92 356096R93 356096R94 356948R91 356948R92 ...

Clutch and Brake Pedal Shaft, 355971R1, New Aftermarket, Made in USA , Steiner # IHS1374 ,Bare metal 19.57" long 1.130" diameter fits, Super C with DISC BRAKES 200 with DISC BRAKES 230 with DISC BRAKES

Gear, Sliding, 4th & 5th Speed, NEW AFTERMARKET , FITS MOST M & MD IH , 34 TOOTH , 10 & 20 SPLINE

Wheel Bearing Kit,with gasket, New aftermarket, has 1 of A-ST2049 Inner Cone, A-ST974 Inner Cup, A-13321DA Outer Cone,A-13417D Outer Cup,GASKET A-43828D ,SEAL A-175272-I fits % 0f Case-IH TRACTOR: H (w/ OEM Wide Front Only) Case-IH TRACTOR: HV ...

Distributor Cap, New Aftermarket, Made in USA, Fits 353898R11 IH horizontal distributor, Also fits Cub with J4 magneto , Will NOT fit Delco or Prestolite distributors. fits Model s Equipment Information A I4 AV Super A Super A-1 Su...

Shim, Stay Rod Cap, Case-IH TRACTOR: HYDRO 70 Case-IH TRACTOR: 1026 Case-IH TRACTOR: 1206 Case-IH TRACTOR: 1256 Case-IH TRACTOR: 1456 Case-IH TRACTOR: 544 Case-IH TRACTOR: 560 Case-IH TRACTOR: 656 Case-IH TRACTOR: 666 Case-IH TRACTOR: 706 ...

DRAWBAR , NEW AFTERMARKET A AND I BRAND , IF YOU NEED IT SHIPPED PLEASE CALL WILL BE SPECIAL HANDLING. • (1) 1.385" Dia. hole, 1.500" from front. Height 1.500" Long 56.000" Replaces 72476C1, 103502C1 Width 2.750" FITS % 0F (BE SURE TO...

Ignition Switch / Key Switch (OEM) Made in the USA , steiner number IHS760 225310 Allis Chalmers 70225310 Allis Chalmers MXS204 Cockshutt 8N3679C Ford 366313R91 International 370375R91 International 379594R92 International 403562R2 Internat...

Push / Pull 1-Prong Ignition Switch , NEW AFTERMARKET , STEINER PART NUMBER IHS381 FITS MODELS WITH MAG A I4 AV Super A Super AV B BN C Super C Cub H HV Super H M MD Super M Super MD Super MTA M...

Deluxe Tie-on Seat Pad for H&M Pans, SILVER, New Aftermarket, A and I part # A-SP300-18 , fits these models with pan seat Case-IH TRACTOR: A Case-IH TRACTOR: AV Case-IH TRACTOR: B Case-IH TRACTOR: C Case-IH TRACTOR: H Case-IH TRACTOR: HV Cas...

Receiver Drier (O-Ring Fittings) NEW AFTERMARKET, FIT % OF 86 SER IH AND OTHERS

Screen, Gasket , Sediment Bowl, 2 1/8" OD Dia, fits % of Allis-Chalmers TRACTOR: D15 (SN 9001>) Allis-Chalmers TRACTOR: D17 (SN 42001>) Allis-Chalmers TRACTOR: D19 (SN 12000>) Allis-Chalmers TRACTOR: D21 (W/ D2900 OR D3500 ENGINE) Allis-Chalmers...

Tune Up Kit , A & I PRODUCTS NUMBER A-21A21R FITS % OF Case-IH TRACTOR: HYDRO 70 (W/ Battery Ignitions 1963 & Up) Case-IH TRACTOR: HYDRO 86 (W/ Battery Ignitions 1963 & Up) Case-IH TRACTOR: 460 (W/ Battery Ignitions 1963 & Up) Case-IH TRACTOR: ...

Pin, Pivot Pin Retaining, 3/8" x 4 7/8" , Used w/ 379941R1 pivot pin & 383909R4 bolster. Case-IH TRACTOR: HYDRO 70 Case-IH TRACTOR: 1206 Case-IH TRACTOR: 1256 Case-IH TRACTOR: 460 Case-IH TRACTOR: 544 Case-IH TRACTOR: 560 Case-IH TRACTOR: 65...

Nut, Spindle SLOTTED, Dim A (1) A: 1.291" Dim B (2) B: .641" Dim C (3) 6 SLOTS Dim D (4) 7/8" -14 THREADS

Clutch and Brake Pedal Shaft, NEW AFTERMARKET, MADE IN USA , Specifications ,Bare metal ,22.20" long ,1.130" diameter PART # 358051R1 FITS, Model Note Equipment Information H sn 391358 and up, Rowcrop and Utility with DISC BRAKES HV sn 391358 a...

Gasket, Thermostat Housing