Kugler Salvage Products For Sale

Battery Box, Allis Chalmers WD, WD45, new aftermarket , ACS030 Specifications Inside dimensions: 7-3/16" wide 8-3/4" tall 9-3/4" long Powder coated in Persian Orange (tint may vary) Ships in a double wall box to protect the finish Dash not in...

1W3293 - INDICATOR NEW AFTERMARKET

SET OF CROSS SHAFT LEVER ARMS. USED, CAME OUT OF OLIVER 1750 FIT OTHER MODEL OLIVERS AND COCKSHUTT TRACTORS. $75.00 FOR THE MATCHED SET OF ARMS.

Front Bumper with hitch, Fits, Ford & Massey Ferguson fits Ford Models 2N, 671, 800, F40, 600, 601, 841, 8N, 821, 661, 2131, 630, 4031, NAA, 820, 840, 621, 641, 4140 4 cylinder, 2031, 681, 4130 4 cylinder, 850, 660, 620, 801, 50, 860, 2000 4 cylin...

Shaft, PTO w/ Coupling (540 RPM) , New Aftermarket, Includes coupling 70218386, 6 spline, 41" long. Fits Allis Chalmers WD , WD45 part number 70222663

Thermostat (180°) fits Case-IH COTTON PICKER: 414 Case-IH COTTON PICKER: 420 Case-IH TRACTOR: 460 (Diesel) Case-IH TRACTOR: 560 (Diesel) Case-IH TRACTOR: 606 (Diesel) Case-IH TRACTOR: 656 (Diesel) Case-IH TRACTOR: 660 (Diesel) Case-IH TRACTO...

TA SHAFT OIL SLINGER, part number # 830651 , fits INTERNATIONAL International Models: 100 thru 986 706, 756, 766, 786, 806, 826, 856, 886, 966, 986 INTERNATIONAL International Models: 1026 thru 1680 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, ...

IH Power Steering Pilot Valve, Used, Came off 656 IH part# 527492R91 fits 544, 656, 666, 686, 706, 806, 1206, 826, 756, 856, 1256, and others

Lower Spindle Shaft Seal, new aftermarket, made in USA Fits Model Note Equipment Information WC w/ tricycle front end WD w/ tricycle front end WD45 w/ tricycle front end

Oil Seal, New Aftermarket, Specifications 1.375" inside diameter 2.378" outside diameter 0.312" wide

Sleeve Sealing O Rings For 1 Cylinder fits, Model Note Equipment Information D17 all gas and LP, G201 and G226 engines WC SN 65528 and up all gas and LP, G201 and G226 engines WD all gas and LP, G201 and G226 engines WD45 all gas and LP, G2...

AR27371 Seal, Load Control , new aftermarket Fits, John Deere BACKHOE: 500A (IND) John Deere INDUSTRIAL/CONSTRUCTION: 500 John Deere TRACTOR: 2510 John Deere TRACTOR: 2520 John Deere TRACTOR: 3010 John Deere TRACTOR: 3020 John Deere TRACTOR:...

R26505Bushing, w/ O-ring , new aftermarket. fits. John Deere INDUSTRIAL/CONSTRUCTION: 600 John Deere INDUSTRIAL/CONSTRUCTION: 700A John Deere TRACTOR: 4000 (SN <-250000) John Deere TRACTOR: 4010 John Deere TRACTOR: 4020 (SN <-250000) John Dee...

R33826 Shaft, Load Control ,New Aftermarket , Dim A (1) 21.620" Long Dim B (2) 1.124" Dia. Fits, John Deere INDUSTRIAL/CONSTRUCTION: 600 John Deere TRACTOR: 4000 (SN <-250000) John Deere TRACTOR: 4010 John Deere TRACTOR: 4020 (SN <-25000...

379327R91 Tie Rod End, new aftermarket Dim A (1) A - 4.060" Dim B (2) B - .812" Dim C (3) 16 UN RH Thread Fits, Front Axle/Steering Parts > Front Axle, Cast I Beam Case-IH TRACTOR: 574 Front Axle/Steering Parts > Tie Rods and Ball Joint...

Hydraulic Oil Cooler , Used, part # 120300C1 , came off 1066 IH Gear Drive, fits other models in 66 ser.

SHIFTER FORK, USED, CASTING NUMBER AM5069, FITS AC D17 ,D19 ,D21 & OTHERS

CLUTCH COLLAR, POWER DIRECTOR, BOTH HALFS & BOLTS ,USED ,70236409 OR 236409 CAME OUT OF D17 FITS SOME OF THE D15 ,D19, D21 AND OTHERS

Drive Gear Bearing Cage, Used, Casting Number 380253R1 fits IH Hydro 100 706 756 766 786 806 826 856 886 966 986 1066 1086 1256 1456 1466 1468 1486 3688 & others

70933C91 Pump, Hyd Main Hitch (12 GPM), New Aftermarket, Has a female spline in driveshaft to drive a piggyback pump. fits fits 560, 660, most 06,56,66 and some 86 tractors Case-IH TRACTOR: 660 Case-IH TRACTOR: 6788 Case-IH TRACTOR: 706 Case-IH T...

Head Gasket Set , New Aftermarkert, Fits Case-IH TRACTOR: M (SN <278049) Case-IH TRACTOR: M (SN 278050>) Case-IH TRACTOR: MV (SN <278049) Case-IH TRACTOR: MV (SN 278050>) Case-IH TRACTOR: OS6 (SN <35463) Case-IH TRACTOR: OS6 (SN 35464>) Case-...

BEARING SLEEVE 1.51IN ID , NEW AFTERMARKET, 3K2151

Center Plate, Brake , New Aftermarket ,Inside Diameter 3.421" ,Outside Diameter 15.000" , Teeth 15 Thickness 0.210" Replaces R56734, R85029 • Use w/ Sunshaft R59928, A-R67198, R56731 or A-R62685 Fits % of these machines, **** be sure to che...

Brake Pad, Fiber , New Aftermarket, 2.500" X 6.500" Come Pack of 3, Priced Individually Pad Fits% of John Deere TRACTOR: 2510 John Deere TRACTOR: 2520 John Deere TRACTOR: 3010 John Deere TRACTOR: 3020 John Deere TRACTOR: 4000 John Deere TRAC...